Fire hoods for light fittings

The hoods cover the light fitting and reinforce the fire protection and that is why they are used. These have a hood of 160mm in diameter and a depth of 130mm so should cover the majority of recessed ceiling fittings. The rim of 50mm provides additional protection. This fire hood can be fitted either from above or below.

Using a fire hood means that you can use a fitting of your choice (up to around 120mm in diameter) when installing recessed lights into a fire compartment. Buy fire hoods at Screwfix.

Click and collect from store. A fire hood is designed to cover your light fitting , it is applied to restore the durability of the surrounding ceiling as well as adding protection to the likelihood of falling debris and insulation material. If your LED spotlights are not fire rate I would recommend changing them to ones that are, as the cost of buying the fire hoods , disconnecting the wiring to run the cable through the hood , reconnection, fitting the hood and its frame properly before reinstalling the light , will probably cost a lot more.

In this post we take a look at the use of fire -rated fittings or fire - hoods on your projects. Fire Rated light fittings. Before we start, it’s important to. We have a great selection to choose from that will cover most applications.

The fire hood is flexible and light and can be used in plasterboar suspended or concrete ceilings. A fire rated downlight is a recessed light that protects the ceiling from fire after a hole has been cut to hold a new light fitting.

Installing fire rated downlights is only necessary when they are recessed or semi-recesse rather than surface mounted. Provides fire protection within electrical socket boxes in fire compartment walls. A pressure exerting graphite manipulated extruded rubber pad. Electropad is simply bonded into position at the rear of the socket box, only reacting in the event of a fire. Smeg Cooker Hood Light Holders.

Next Day Delivery Available! Up To Off Exquisite Collection Of Search light Bathroom Lights Now! Free UK delivery on eligible orders! Basic fire hoods for use with non fire rated downlights.

Provide minute fire protection which is adequate for domestic use. Free delivery on all orders over £85. The regulations have scared many of them into specifying them just. The Outdoor Range includes lighting for outside walls, decking and driveways as well as flood lighting and heating. All lights are IP rated for weatherproofing and are made from premium durable materials.

We carry low voltage as well as mains rated products as well as a range of high efficiency LED options. TENMAT FF1Downlighter Covers are fire and acoustic rated covers or fire hoods designed to fire rate downlight fixtures and reinstate the performance of ceilings when penetrated by recessed downlights. The covers are available in various sizes to suit a wide range of lighting products over and above those covered by fire rated downlights. Grab A Bargain Direct From The Manufacturer.

Proprietary fire hoods can be used over light fittings to help provide the required fire resistance.

Certified fire resistant downlighters are available, which achieve fire resistance without further protection. Our intumescent fire hoods are suitable for a range of emergency lighting fittings and give minutes of fire protection. In some buildings it is specified that fire.

Order online at Screwfix. Maintains ceiling fire rating with the installation of a downlight. Our stock includes fire hoods in 150mm which is the ideal size for a majority of GU10’s and MRspot fittings and 250mm for use with larger ceiling lights. View all Thermahood Products Thermahood downlight covers has been developed to be fitted over downlights which are situated in ceilings to lofts and attics.

It is known that downlights are a weak point in the fight against heat loss. They can be either fixed or adjustable acoustic rated lights, required by the Building Regulations to be mounted in specific ceilings.